Course Description for MTCSWE Exam

MikroTik Certified Routing Engineer is an advanced certification that covers different aspects of routing, relevant to larger networks and ISPs, with focus on OSPF with single and multiple areas, Policy Routing, and advance use of static routing.

MikroTik Certified Routing Engineer is an advanced certification that covers different aspects of routing, relevant to larger networks and ISPs, with focus on OSPF with single and multiple areas, Policy Routing, and advance use of static routing. MTCRE Exam also covers the configuration of multi-homed devices, for Load Balancing and Failover. MTCRE is a requirement for the third level certification – MTCINE, MTCSE

Requirements

Valid MTCNA Certificate Number.

What is the target audience?

  • This course is intended for anyone interested in learning MikroTik routing.
  • ISP Owner / Network Engineer
  • Network Consultant
  • Anyone who want to build the carrier in networking

By the end of this training session, the student will be familiar with routing . He will also be able to configure link redundancy (load balancing, failover), policy routing, vlan and tunneling.

CURRICULUM

Section 1: Routing Overview

1. MikroTik Routing Concept
  • What is router and routing
  • When we use routing?
  • Routing Information Base (RIB)
  • Forwarding Information Base (FIB)
  • Routing decision
2. Static vs Dynamic Routing Protocol
  • The different between static route and dynamic route
  • The different between Interior and Exterior Gateway Protocol

Section 2: Static Routing

3. MikroTik Static Routing Concept
  • Destination-address
  • Gateway and check gateway
  • Distance
  • Scope and target scope
4. MikroTik Static Routing Configuration
  • Creating routes
  • Setting default route
  • Implementing static routing on simple network
5. MikroTik Load Balancing
  • Types of load balancing in MikroTik
  • Load balancing Equal Cost Multiple Path (ECMP)
6. MikroTik Failover
  • Administrative Distance
  • Check Gateway implementation
7. MikroTik Routing Policy
  • Mangle routing mark
  • Push specific traffic through one specific gateway
8. MikroTik Recursive Routing
  • Scope and target scope
  • Recursive nexthope lookup

Section 3: OSPF

9. OSPF Overview
  • What is OSPF
  • How OSPF protocol works
10. OSPF Network Structure
  • OSPF Area (backbone, NSSA, Stub)
  • DR, BDR
  • IR, ABR, ASBR
  • OSPF LSA
11. OSPF External Route Distribution Methods
  • Redistribute
  • AS Type-1
  • AS Type-2
12. OSPF Interface Type and Interface Cost
  • Point to Point
  • Bradcast
  • Point to Multi Point
  • NBMA
13. OSPF Security
  • Passive Interface
  • OSPF authentication methods
14. OSPF Virtual Link
  • OSPF Virtual Link
  • Extended backbone area
15. OSPF Redundancy
  • Dijkstra Algorithm
  • OSPF load balancing
  • OSPF fail over
16. Routing Filter
  • Filtering Prefix
  • Change route parameters

Section 4: MikroTik VLAN

17. VLAN Overview
  • 802.1Q
  • QinQ
18. VLAN in RouterOS
  • Create VLAN in RouterOS

Section 5: VPN

19. MikroTik EOIP Tunnel
  • Site to Site layer 2 tunnel
20. PPP Tunnel
  • PPP Tunnel PPTP Tunnel
  • L2TP Tunnel
  • PPPOE Tunnel
21. Point to Point Addressing
  • Using /32 IP address for tunnel

Section 6: Mesh Made Easy (MME)

22. MME Overview
  • Quick introduction of MME as an alternative to OSPF over wireless network

Exam

26. MTCNA Exam

MikroTik Official Online Exam

  • On the last day of the training there will be an online exam of 60 minutes. (25 questions each.)
  • The passing grade is 60%, if you pass the exam your certificate will be immediately available in your MikroTik account (PDF format)
  • For those who score between 50-59%, will get a second chance. (Free of cost and the same day).
  • Please try the example test in your www.mikrotik.com account to get a better picture about the online exam.

GỞI THÔNG TIN ĐỂ NHẬN TƯ VẤN

 

Blogs relative

Same category

DANH MỤC

 

BLOG

 

SERVICE

 

PRODUCT

 

New Product

 

YOUTUBE CHANNEL

FANPAGE

Course

 

Blogs

 
 
Tư vấn ngay